IMPROVE YOUR WI-FI COVERAGE WITH OUR BUSINESS WI-FI BOOSTER

The Commander Business Wi-Fi Booster (TP Link HX510) is a mesh device that is built to eliminate dead zones and to provide uninterrupted Wi-Fi throughout your premises. It will enable devices in your network to have faster speeds, greater coverage, and a more reliable connection.

To improve the Wi-Fi signal throughout your premises. Placing the device in the optimal location helps ensure the best coverage for areas which are lacking.

To improve the Wi-Fi signal throughout your premises. Placing the device in the optimal location helps ensure the best coverage for areas which are lacking.

This device is designed for indoor use only. Place the device in a central location to the area you want to cover for the best Wi-Fi performance.

• The device should not be located in a place where it will be exposed to moisture or excessive heat.
• Place the device in a location where it can be connected to multiple devices as well as to a power source.
• Make sure the cables and power cord are safely placed out of the way so they do not create a tripping hazard.
• Keep the device away from devices with strong lectromagnetic interference, such as Bluetooth devices, cordless phones and microwaves.
• The device can be placed on a shelf or desktop.

Yes, the device requires power.

Yes, the device has three ethernet ports and you can plug in compatible hardware.

Most modems should be compatible, more info can be found here.

No, always treat your device and its accessories with care and keep it in a clean and in a dust-free place if possible.

• Do not restrict airflow around the device.
• Do not place this device in direct sunlight or any hot areas. Safe operating temperature of this device is between 0° and 40°C
• Do not allow this device to come in contact with any liquid or moisture. Do not place this device in any wet or humid areas such as kitchen, bathroom, or laundry rooms
• Do not expose your device or its accessories to open flames.
• Do not drop, throw. or try to bend your device or its accessories.
• Do not paint your device or its accessories.
• Arrange power and ethernet cables in a manner such that they are not likely to be stepped on or have items placed on them.
• Please check local regulations for disposal of electronic products.

PAIR USING CABLE

1. Place the Business Wi-Fi Booster next to your Commander Business Modem.
2. Ensure that the Commander Business Modem is connected to the Internet.
3. Connect the Business Wi-Fi Booster to power, switch on.
4. Plug the yellow RJ45 ethernet cable (supplied with the Business Wi-Fi Booster) into a free ethernet port on the back of the Commander Business Modem, and the other end into the Business Wi-Fi Booster WAN/LAN port.
5. Allow 2 minutes for the Business Wi-Fi Booster to download information from Commander Business Modem, verify the status LED (on the bottom of the device) is flashing blue to confirm it is in pairing mode. (If not, factory reset the device insert a straightened paper clip or similarly shaped object into the small hole marked with the reset at the back of the device and hold for at least five (5) seconds. If you are still having trouble, please call our friendly tech support team on 13 70 90 (Option 3).
6. After completing the configuration of the first device, the LED will be white or green. You can now unplug the Business Wi-Fi Booster and move it to your desired location, you can also choose to add more mesh devices to extend Wi-Fi coverage.
7. To add more Business Wi-Fi Boosters to your premise, follow from Step 4 replacing your Commander Business Modem to the first Business Wi-Fi Booster.

SET UP THE NETWORK VIA TP-LINK AGINET APP

1. Download the Aginet App
   You can easily set up and manage your network through the Aginet app.
2. Search for Aginet on the Apple app Store or Google Play.
3. Open the Aginet app and log in with your TP-Link ID.
   Note: This step is optional. If you don’t have an account, you may choose to create a TP-Link ID, or simply manage your device without it. For a better experience we recommend you create an account.
4. Set up your network, select "Create a Network" in the Aginet app then choose "Connect via Ethernet Cable". Follow the steps to complete the setup and connect to the internet.
5. After completing the configuration of the first device, you can choose to add more mesh devices to extend Wi-Fi coverage.

SET UP THE NETWORK VIA A WEB BROWSER

1. Connect your Laptop/PC/Mobile phone to the mesh device wirelessly or with an Ethernet cable. The default wireless network name (SSID) and password are printed on the product label at the bottom of the mesh device.
2. Launch a web browser, and enter http://tplinkwifi.net or http://192.168.88.1 in the address bar. Create your own login password and log in to the device.

Need a hand?

• If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
• Make sure http://tplinkwifi.net is correctly entered in the web browser.
• Use another web browser and try again.
• Reboot your device and try again.
• Disable then enable the network adapter being used.

Follow the Quick Setup instructions to set up your network. Contact Technical Support on 13 70 90 (Option 3) if pairing is unsuccessful.

You will have to relocate the Business Wi-Fi Booster closer to the Commander Business Modem. Strong signal strength will show a solid white light, medium signal will show a blue solid light and a red light shows poor signal strength.

Reset the device and allow a few minutes for it to reconfigure, this will most likely fix the issue. To reset the Business Wi-Fi Booster, insert a straightened paper clip or similarly shaped object into the small hole marked with the reset icon underneath the device and hold for ten (10) seconds. Re-attempt pairing using the “Wired” instructions after you have completed a reset. If you are still having trouble, please call our friendly tech support team on 132 777

To improve the Wi-Fi signal throughout your premises. Placing the device in the optimal location helps ensure the best coverage for areas which are lacking.

This device is designed for indoor use only. Place the device in a central location to the area you want to cover for the best Wi-Fi performance. Check the user guide for more details.

Yes, the device requires power.

Yes, the device has two ethernet ports and you can plug in compatible hardware..

No, this device will only work with the Commander Business Modem (Netcomm - NL1901).

The device contains a transmitter and a receiver. When it is on, it receives and transmits RF energy. The device conforms with the radio frequency (RF) exposure limits adopted by the Australian Communications and Media Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2014, when used at a distance greater than 20 cm from the body.

No, always treat your device and its accessories with care and keep it in a clean and in a dust-free place if possible.

teastasetasdtatd

• Do not restrict airflow around the device.
• Do not place this device in direct sunlight or any hot areas. Safe operating temperature of this device is between 0° and 40°C
• Do not allow this device to come in contact with any liquid or moisture. Do not place this device in any wet or humid areas such as kitchen, bathroom, or laundry rooms
• Do not expose your device or its accessories to open flames.
• Do not drop, throw. or try to bend your device or its accessories.
• Do not paint your device or its accessories.
• Arrange power and ethernet cables in a manner such that they are not likely to be stepped on or have items placed on them.
• Please check local regulations for disposal of electronic products.

1. Place the Business Wi-Fi Booster next to your Commander Business Modem.
2. Ensure that the Commander Business Modem is connected to the Internet.
3. Connect the Business Wi-Fi Booster to power, switch on.
4. Plug the yellow RJ45 ethernet cable (supplied with the Business Wi-Fi Booster) into a free ethernet port on the back of the Commander Business Modem, and the other end into the Business Wi-Fi Booster.
5. Allow 2 minutes for the Business Wi-Fi Booster to download information from Commander Business Modem, the LED will turn solid white or blue, depending on the signal strength.
6. Unplug the ethernet cable from between the two devices and position the Business Wi-Fi Booster in a satisfactory location in your premises.
7. Power on the Business Wi-Fi Booster.
8. Wait approximately 10 minutes as the Business Wi-Fi Booster attempts to pair with the Commander Business Modem, the LED will flash blue.
   
   Please note: If the Business Wi-Fi Booster is unable to pair, please relocate the device closer to the Commander Business Modem.
9. Begin using your new mesh network and enjoy your online experience.

You will have to relocate the Business Wi-Fi Booster closer to the Commander Business Modem. Strong signal strength will show a solid white light, medium signal will show a blue solid light and a red light shows poor signal strength.

Reset the device and allow a few minutes for it to reconfigure, this will most likely fix the issue. To reset the Business Wi-Fi Booster, insert a straightened paper clip or similarly shaped object into the small hole marked with the reset icon underneath the device and hold for ten (10) seconds. Re-attempt pairing using the “Wired” instructions after you have completed a reset. If you are still having trouble, please call our friendly tech support team on 132 777